dmesg - LLVM Clang 3.2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-18-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.2-23ubuntu2) ) #28-Ubuntu SMP Thu Apr 11 19:38:55 UTC 2013 (Ubuntu 3.8.0-18.28-generic 3.8.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003e0c4fff] usable
BIOS-e820: [mem 0x000000003e0c5000-0x000000003e2c5fff] ACPI NVS
BIOS-e820: [mem 0x000000003e2c6000-0x000000003eebdfff] ACPI data
BIOS-e820: [mem 0x000000003eebe000-0x000000003eeeefff] ACPI NVS
BIOS-e820: [mem 0x000000003eeef000-0x000000003eefffff] ACPI data
BIOS-e820: [mem 0x000000003ef00000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Apple Inc. Macmini2,1/Mac-F4208EAA, BIOS MM21.88Z.009A.B00.0706281359 06/28/07
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x3e0c5 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFE00000 mask FFFE00000 write-protect
1 base 000000000 mask FC0000000 write-back
2 base 03F000000 mask FFF000000 uncachable
3 base 03EF00000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x3e0c4fff]
[mem 0x00000000-0x3dffffff] page 2M
[mem 0x3e000000-0x3e0c4fff] page 4k
kernel direct mapping tables up to 0x3e0c4fff @ [mem 0x1fffd000-0x1fffffff]
RAMDISK: [mem 0x36120000-0x37087fff]
ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
ACPI: XSDT 000000003eefd1c0 00074 (v01 APPLE Apple00 0000009A 01000013)
ACPI: FACP 000000003eefb000 000F4 (v03 APPLE Apple00 0000009A Loki 0000005F)
ACPI: DSDT 000000003eef0000 0384E (v01 APPLE Macmini 00020001 INTL 20050309)
ACPI: FACS 000000003eec0000 00040
ACPI: HPET 000000003eefa000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 000000003eef9000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: MCFG 000000003eef8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ASF! 000000003eef7000 000A0 (v32 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SBST 000000003eef5000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ECDT 000000003eef4000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 000000003eebb000 0064F (v01 APPLE SataPri 00001000 INTL 20050309)
ACPI: SSDT 000000003eeba000 0069C (v01 APPLE SataSec 00001000 INTL 20050309)
ACPI: SSDT 000000003eeef000 004DC (v01 APPLE CpuPm 00003000 INTL 20050309)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000003e0c4fff]
Initmem setup node 0 [mem 0x00000000-0x3e0c4fff]
NODE_DATA [mem 0x3e0c0000-0x3e0c4fff]
[ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003c800000-ffff88003d7fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x3e0c4fff]
On node 0 totalpages: 254036
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 3908 pages used for memmap
DMA32 zone: 246145 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0x40000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88003de00000 s85056 r8192 d21440 u1048576
pcpu-alloc: s85056 r8192 d21440 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 250058
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 967932k/1016596k available (7006k kernel code, 452k absent, 48212k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
NR_IRQS:16640 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1833.330 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.66 BogoMIPS (lpj=7333320)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26689 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz (fam: 06, model: 0f, stepping: 02)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
smpboot: Booting Node 0, Processors #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (7333.32 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3e0c5000-0x3e2c5fff] (2101248 bytes)
PM: Registering ACPI NVS region [mem 0x3eebe000-0x3eeeefff] (200704 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000003eeb8c90 0022A (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0022A (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
ACPI: SSDT 000000003eeb8a10 00232 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00232 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
ACPI: SSDT 000000003eeb8f10 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
ACPI: SSDT 000000003eeb7f10 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
pci_root PNP0A08:00: ACPI _OSC control (0x1d) granted
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0x50380000-0x503fffff]
pci 0000:00:02.0: reg 14: [io 0x20f0-0x20f7]
pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0x50400000-0x5043ffff]
pci 0000:00:07.0: [8086:27a3] type 00 class 0x110100
pci 0000:00:07.0: reg 10: [mem 0x50444000-0x50444fff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0x50440000-0x50443fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x20a0-0x20bf]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x2080-0x209f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x2060-0x207f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io 0x2040-0x205f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0x50445400-0x504457ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 10: [io 0x20e8-0x20ef]
pci 0000:00:1f.1: reg 14: [io 0x2104-0x2107]
pci 0000:00:1f.1: reg 18: [io 0x20e0-0x20e7]
pci 0000:00:1f.1: reg 1c: [io 0x2100-0x2103]
pci 0000:00:1f.1: reg 20: [io 0x20c0-0x20cf]
pci 0000:00:1f.2: [8086:27c4] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0x20d8-0x20df]
pci 0000:00:1f.2: reg 14: [io 0x20fc-0x20ff]
pci 0000:00:1f.2: reg 18: [io 0x20d0-0x20d7]
pci 0000:00:1f.2: reg 1c: [io 0x20f8-0x20fb]
pci 0000:00:1f.2: reg 20: [io 0x2020-0x202f]
pci 0000:00:1f.2: reg 24: [mem 0x50445000-0x504453ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [11ab:4362] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [mem 0x50200000-0x50203fff 64bit]
pci 0000:01:00.0: reg 18: [io 0x1000-0x10ff]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x50200000-0x502fffff]
pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0x50100000-0x5010ffff 64bit]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x50100000-0x501fffff]
pci 0000:03:03.0: [11c1:5811] type 00 class 0x0c0010
pci 0000:03:03.0: reg 10: [mem 0x50000000-0x50000fff]
pci 0000:03:03.0: supports D1 D2
pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x50000000-0x500fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3e0c5000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs APP0001 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: disabling [io 0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io 0x1000-0x1fff]
system 00:06: [io 0x0680-0x06ef] has been reserved
system 00:06: [io 0x0800-0x080f] has been reserved
system 00:06: [io 0x0810-0x0817] has been reserved
system 00:06: [io 0x0400-0x047f] has been reserved
system 00:06: [io 0x0500-0x053f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 01] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x50500000-0x507fffff pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x50800000-0x509fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x50500000-0x5051ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x50200000-0x502fffff]
pci 0000:00:1c.0: bridge window [mem 0x50500000-0x507fffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0x50100000-0x501fffff]
pci 0000:00:1c.1: bridge window [mem 0x50800000-0x509fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1e.0: bridge window [mem 0x50000000-0x500fffff]
pci 0000:00:1e.0: power state changed by ACPI to D0
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x50200000-0x502fffff]
pci_bus 0000:01: resource 2 [mem 0x50500000-0x507fffff pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0x50100000-0x501fffff]
pci_bus 0000:02: resource 2 [mem 0x50800000-0x509fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0x50000000-0x500fffff]
pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS mismatch (256 != 64), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15776k freed
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1366645423.544:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1921
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 16384K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20c8 irq 15
ata_piix 0000:00:1f.2: MAP [
P0 P2 -- -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x20d8 ctl 0x20fc bmdma 0x2020 irq 19
ata4: SATA max UDMA/133 cmd 0x20d0 ctl 0x20f8 bmdma 0x2028 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0x50445400
ata1.00: ATAPI: MATSHITACD-RW CW-8124, DACK, max UDMA/33
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-18-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x000020a0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-18-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002080
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-18-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-18-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-18-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM MATSHITA CD-RW CW-8124 DACK PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
ata3.01: ATA-8: Hitachi HTS542580K9SA00, BBBAC3GP, max UDMA/133
ata3.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9dfdbc130b8a2eee78bd3f8b28a84be4acef2705'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:07: setting system clock to 2013-04-22 15:43:45 UTC (1366645425)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3.01: configured for UDMA/133
scsi 2:0:1:0: Direct-Access ATA Hitachi HTS54258 BBBA PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:1:0: Attached scsi generic sg1 type 0
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[102]: starting version 175
sky2: driver version 1.30
sky2 0000:01:00.0: Yukon-2 EC chip revision 2
sky2 0000:01:00.0: irq 42 for MSI/MSI-X
sky2 0000:01:00.0 eth0: addr 00:1f:f3:45:4f:13
Disabling lock debugging due to kernel taint
firewire_ohci 0000:03:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
firewire_core 0000:03:03.0: created device fw0: GUID 002312fffeea4ab6, S400
usb 4-1: new low-speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=047d, idProduct=2043
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Kensington U+P Keyboard
usb 4-1: Manufacturer: NOVATEK
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2
hid-generic 0003:047D:2043.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK Kensington U+P Keyboard] on usb-0000:00:1d.2-1/input0
input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input3
hid-generic 0003:047D:2043.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK Kensington U+P Keyboard] on usb-0000:00:1d.2-1/input1
usb 4-2: new full-speed USB device number 3 using uhci_hcd
usb 4-2: New USB device found, idVendor=1532, idProduct=0007
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: DeathAdder
usb 4-2: Manufacturer: Razer
input: Razer DeathAdder as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
hid-generic 0003:1532:0007.0003: input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1d.2-2/input0
usb 5-1: new full-speed USB device number 2 using uhci_hcd
usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbhid 5-1:1.0: couldn't find an input interrupt endpoint
usb 5-2: new full-speed USB device number 3 using uhci_hcd
usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: IR Receiver
usb 5-2: Manufacturer: Apple Computer, Inc.
hid-generic 0003:05AC:8240.0004: hiddev0,hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Adding 1014780k swap on /dev/sda3. Priority:-1 extents:1 across:1014780k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[326]: starting version 175
lp: driver loaded but no devices found
intel_rng: FWH not detected
microcode: CPU0 sig=0x6f2, pf=0x20, revision=0x57
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
cfg80211: Calling CRDA to update world regulatory domain
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized drm 1.1.0 20060810
type=1400 audit(1366645440.166:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=392 comm="apparmor_parser"
type=1400 audit(1366645440.166:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=392 comm="apparmor_parser"
type=1400 audit(1366645440.166:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=392 comm="apparmor_parser"
i915 0000:00:02.0: setting latency timer to 64
ath5k 0000:02:00.0: registered as 'phy0'
microcode: CPU1 sig=0x6f2, pf=0x20, revision=0x57
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Skipping LVDS initialization for Apple Mac Mini (Core 2 series)
applesmc: key=137 fan=1 temp=7 index=7 acc=0 lux=0 kbd=0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
[drm] initialized overlay support
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
usb 5-1: USB disconnect, device number 2
fbcon: inteldrmfb (fb0) is primary device
[drm] Setting output timings on SDVOB failed
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
hda_codec: STAC922x, Apple subsys_id=106b0800
usb 5-1: new full-speed USB device number 4 using uhci_hcd
input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
usb 5-1: New USB device found, idVendor=05ac, idProduct=8205
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
init: failsafe main process (747) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (839) terminated with status 1
ppdev: user-space parallel port driver
type=1400 audit(1366645442.946:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=856 comm="apparmor_parser"
type=1400 audit(1366645442.946:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=856 comm="apparmor_parser"
sky2 0000:01:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
ath5k: ath5k_hw_get_isr: ISR: 0x00040004 IMR: 0x00000000
type=1400 audit(1366645444.898:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=895 comm="apparmor_parser"
type=1400 audit(1366645444.898:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=895 comm="apparmor_parser"
type=1400 audit(1366645444.902:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=897 comm="apparmor_parser"
type=1400 audit(1366645444.902:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=897 comm="apparmor_parser"
type=1400 audit(1366645444.906:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=896 comm="apparmor_parser"
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Creating 2 devices ...
init: zram-config pre-start process (944) terminated with status 1
sky2 0000:01:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
show_signal_msg: 48 callbacks suppressed
conftest[8335]: segfault at 0 ip 00000000004005c0 sp 00007fff97bfe170 error 4 in conftest[400000+1000]
conftest[8364]: segfault at 0 ip 00007f8a340dc1e6 sp 00007fff70a006a8 error 4 in libc-2.17.so[7f8a33f98000+1be000]
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 20)
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 22)
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
[drm] Setting output timings on SDVOB failed
hub 4-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
usb 4-2: USB disconnect, device number 3
usb 4-2: new full-speed USB device number 4 using uhci_hcd
usb 4-2: New USB device found, idVendor=1532, idProduct=0007
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: DeathAdder
usb 4-2: Manufacturer: Razer
input: Razer DeathAdder as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input9
hid-generic 0003:1532:0007.0005: input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1d.2-2/input0
conftest[9170]: segfault at 0 ip 00007f6dd26921e6 sp 00007fff02810028 error 4 in libc-2.17.so[7f6dd254e000+1be000]
conftest[9195]: segfault at 0 ip 00007f763c8f21e6 sp 00007fffa41c0ad8 error 4 in libc-2.17.so[7f763c7ae000+1be000]
CPU0: Core temperature above threshold, cpu clock throttled (total events = 20)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 24)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged